Product ID:8401 CURING AGENT, 104012000
MSDS Date:04/07/1993
FSC:8010
NIIN:00N072384
MSDS Number: CBYCM

QUAKER CONSTRUCTION PRODUCTS INC

8810 W 100TH ST SOUTH
SAPULPA, OK 74066
US

Emergency Phone: 800-523-7010

Info Phone: 918-227-0603

Preparer: J. DORAN

Cage: QUAKE

SELBY BATTERSBY & CO

PHILADELPHIA, PA 19143-3211 US

Telephone: 215-474-4790

Cage: 86937

0 @ 0F

CAS: 2855-13-2

RTECS: GV6129000

Fraction By Weight: 25-40%

OSHA PEL N/K

ACGIH TLV: N/K

0 @

CAS: 1477-55-0

RTECS: PF8970000

Fraction By Weight: 25-40%

OSHA PEL 0.1 MG/M3 (MFR)

ACGIH TLV: 0.1 MG/M3 (MFR)

0.00 LB/GAL

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

CORROSIVE NATURE OF THIS MATL, SWALLOWING MAY RSLT

RTECS: 9999999ZZ

ALIMENTARY TRACT, W/HEMORRHAGE & FLUID LOSS. ASPIR

RTECS: 9999999ZZ

LUNG INJURY. EVACUATION OF STOM CONTENTS SHOULD BE

RTECS: 9999999ZZ

GASTRIC LAVAGE AFTER ENDOTRACHEAL INTUBATION.

RTECS: 9999999ZZ

& FULL LENGTH FACESHIELD .

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: VAPOR OR MIST MAY CAUSE
RESPIRATORY IRRITATION, DIZZINESS AND/OR NAUSEA. TIGHTNESS OF
CHEST, SHORTNESS OF BREATH, HEADACHE. EYES: WILL CAUSE SEVERE BURNS
TO EYES. MAY CAUSE BLINDNESS. SKIN : MAY IRRITATE AND BURN SKIN.
POSSIBLE SKIN SENSITIZER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NOT RELEVANT
Medical Cond Aggravated by Exposure:SKIN CONTACT MAY AGGRAVATE EXISTING
DERMATITIS. OVEREXP TO VAPOR, DUST OR MIST MAY AGGRAVATE EXISTING
RESPIRATORY CONDITIONS, SUCH AS ASTHMA, BRONCHITIS & INFLAMMATORY
OR FIBROTIC RESPIRATORY DISEASE.

First Aid:EYES: IMMED FLUSH W/LG AMTS OF RUNNING WATER FOR AT LEAST 15
MIN. GET MED ATTN IMMED. IF MED ATTN IS NOT IMMED AVAIL, CONTINUE
FLUSHING W/WATER FOR ADDNL 15 MIN. SKIN: IMMED FLUSH W/LG AMTS OF
RUNNING WATER FOR AT LEAST 15 MIN. REMOVE CONTAMD CLTHG & SHOES.
GET MED ATTN IMMED. WASH CLTHG BEFORE REUSE. DESTROY NON-RESIST
FOOTWEAR. INGEST: IF CONSCIOUS & CAN SWALLOW, GIVE 2 GLASSES OF
WATER (SUPDAT)

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . DRUMS NEAR FIRE SHOULD BE SPRAYED TO PREVENT RUPTURE.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO
CLOSED CONTAINER. WASH AREA WITH DETERGENT AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM CHILDREN. DO NOT GET IN
EYES OR ON SKIN OR CLOTHING. DO NOT TAKE INTERNALLY. KEEP CONTAINER
CLOSED. AVOID BREATHING VAPOR OR DUST.
Other Precautions:WASH THORO AFTER HANDLING. USE WITH ADEQUATE VENT.
PROTECT FROM FREEZING. CONTACT LENSES SHOULD NOT BE WORN. PERSONAL
PROT RECOMS SHOULD BE REVIEWED BY PURCHASER. WORKPLACE CONDITIONS
ARE IMPORTANT FA CTORS IN SPECIFYING ADEQUATE PROTECTION.

Respiratory Protection:USE NIOSH APPROVED DUST MASK RESPIRATOR UNDER
APPROPRIATE OSHA STANDARDS AND REGULATIONS. A COMBINATION OF BOTH
PROPER VENTILATION AND RESPIRATORY PROTECTION WOULD TEND TO
ELIMINATE MOST RISKS.
Ventilation:LOCAL EXHAUST IS RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 8)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
LONG SLEEVE SHIRTS & PANTS.
Work Hygienic Practices:WASH HANDS WITH SOAP AND WATER AFTER USING AND
BEFORE EATING.
Supplemental Safety and Health
FIRST AID PROC: (16 OZ). DO NOT INDUCE VOMIT. GET MED ATTN. NEVER GIVE
ANYTHING BY MOUTH TO UNCON PERSON. INHAL: REMOVE TO FRESH AIR. IF
NOT BRTHG, GIVE ARTF RESP. IF BRTHG IS DFCLT OR CYANOSIS (BLUE
DISCOLORATION OF SKIN/LIPS) IS NOTED, QUALIFIED PERS MAY ADMIN
OXYGEN. GET IMMED MED ATTN. NOTE TO MD: DUE TO (ING 4)

Boiling Pt:B.P. Text:477F,247C
Vapor Pres:SEE INGS
Vapor Density:LTR/AIR
Spec Gravity:1.00 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR TO AMBER LIQUID WITH AMINE ODOR.

Stability Indicator/Materials to Avoid:YES
WATER, STRONG OXIDIZERS.
Stability Condition to Avoid:FREEZING TEMPERATURES, EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON DIOXIDE AND POSSIBLY CARBON
MONOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL EPA REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.